Progress, and Tons more pictures!

This update is going to be a little more picture heavy and text light.  Extreme Overkill Fabrication has been busy on everything from the frame down, and a bit above the rails as well.

• The suspension links are tack welded and installed.
• The front coil mounts are tacked in.
• The new rear cross member and rear coil-over mount notch are in progress and being designed.
• The front and rear axle armor is all trimmed to fit. 
• He is building weight support rods to take the place of the coil-over. This is so The Spike can be cycled on the lift to check clearances, determine if all mounts are correct, and get the chassis lift height finalized.

 

 

 

Also in the near future, mounting the steering box. I picked up the Low Range Off-Road frame bracket for the steering box, but with no instructions, we need to do some research to get it right.

 

 

 

 

 

On the parts list, the front hubs have arrived and upgraded set of brake rotors are also in hand. We are still needing calipers, if anyone wants to sponsor a good set of those. 

Follow my build on C4x4 Online Magazine, www.c4x4.com/Projects/Spike/Spike.html

Be sure to like and follow my Facebook page, www.facebook.com/ProjecttheSpike/

#ExtremeOverkillFabrication #EOF #MayhemMetalWorks #DakotaDigital #VHX1023 #RenoOffRoad #ROR #BFGKrawlers #BFG #RedLabel #RacelineBeadlock #Powdercoat #DevineDeisel #ProjecttheSpike #UCORA #UnitedChristianOffRoadAlliance #OffRoadSolutions #DakotaDigital #LowRangeOffRoad #C4x4 #RADesignProducts #PRPSeats #ExtremeOverkillFab #YukonGear #RandysRingandPinion #FormulaToy #FormulaToy4Seat #Formula4 #HendrixMotorsports #HendrixChassis #Hendrix